We use cookies to make your experience better. Read more
Payne PA5SAN 1 Stage AC Condenser
PA5SAN
P = Generic / Branding
A = AC / OD Type
5 = 14.3 SEER2 / SEER2
S = Single-Stage / OE Design Type
A = Major Iteration / Major Series
N = 208/230-1 / Voltage
4 = R-410A / Refrigerant
36 = 3 Ton / Nominal Cooling
0 = Standard / Feature
0 = Standard / Special Feature
W = Standard Southwest AC / Region
NOTE: Ratings are subject to change at any time. Always refer to the AHRI directory (www.ahridirectory.org) for the most up-to-date ratings information.
Features / Benefits
Efficiency
13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2 - 13.0 EER2 (11.2 - 13.0 EER)
Indoor air quality accessories available
Reliability
R-410A refrigerant - environmentally sound, won’t deplete the ozone layer and low lifetime service cost.
Scroll compressor
Internal pressure relief valve
Internal thermal overload
Filter drier
Durability
Protection Package:
Solid, durable sheet metal construction
Dense wire coil guard
Applications
Long-line - up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.4 m) evaporator above condenser (See Long Line Guide for more information.)
Low ambient cooling (down to 0°F / -18°C ) with approved low ambient accessory kits.
Prop 65
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
PG8 Payne Gas Furnace
Payne 80% 4-Way Multipoise Non-Condensing Gas Furnace
The PG80/PG80L applications are easy with 4-way multipoise design, through-the-furnace downflow venting, 13 different venting options, and designed for easy service access. An inner blower door is provided for tighter sealing in sensitive applications. The PG80 furnaces are approved for use with natural or propane gas, and the PG80L - Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
PERFORMANCE
LED diagnostics and self test feature
Hot surface ignition
Draft safeguard switch to ensure proper furnace venting
Inner door for tighter sealing
INSTALLATION FLEXIBILITY
4-way Multipoise furnace, 13 vent applications
Dual fuel compatible (including 13.0 SEER Heat Pumps)
All models are chimney friendly when used with accessory vent kit
APPLICATIONS
Compact design - only 33-1/3 in. (847 mm) tall
Propane convertible with gas conversion accessory
CERTIFICATON
Cabinet air leakage less than 2.0% at 1.0 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in.W.C. when tested in accordance with ASHRAE standard 193
Prop 65
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
CVPVA, CSPVA Evaporator Coil with Vertex™Technology
Upflow/Downflow AC Only
This evaporator coil incorporates proven standards for reliable system operation and performance
throughout the life of this product. These quality coils, manufactured and installed as part of a
total comfort system, provide AHRI-rated performance ratings and are additionally listed with UL
and c-UL.
Available for use in Puron® R-410A refrigerant only, it is a cased V-coil or slope coil that is
housed in a durable, 24-gauge, pre-painted taupe metallic cabinet. The fully insulated cabinet
(foil faced with R-2.1 insulation) provides for quiet efficient operation of the evaporator coil.
DESIGN FEATURES
• Designed with performance in mind, this new evaporator coil offers lower pressure drops to
enhance system performance and airflow characteristics.
• All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to
approximately 10° of superheat at the suction service valve.
• The corrosion-resistant drain pan is designed of a “Polybutylene terephthalate” material (PBT)
that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water
drainage, improved moisture removal, and home comfort.
• The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain
connections.
• Provided with industry proven sweat connections for leak-free operation to maintain system
reliability. The location of the lineset connections allows for removal of the access door for easy
cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the
factory with enough length of straight tube— once the pipe swages are cut off—to accommodate
braze-less compression fittings.
• Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating
pressure it would see in actual cooling or heating application.
• This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV
lights.
• Comes with a “no delta plate” for easy, quick access to both sides of the coil for service and
cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable
from the front of the unit without the use of any tools.
WARRANTY
• Default 5-year parts limited warranty:
* Applies to original purchaser/homeowner and not available to subsequent owners, except in
jurisdictions where laws dictate otherwise.
See Warranty certificate for complete details and restrictions.
Brand/ Manufacturer | Payne |
---|---|
Model # | PA5SAN460 CVPVA6024XMC PG80MSAA48090C |
System Type | Cooling with Gas Heat |
Product Series | R410A PA5 1 Stg AC/PG8 GF |
Tons | 5 |
BTU | 54000 |
Nominal SEER | 15 SEER |
System SEER | 14 SEER |
Rated SEER | 14 |
Rated EER | 11.5 |
HSPF Rating | NA |
Refrigerant | R-410A |
Install Position | R410A Up/Down Pos/CVPVA |
AFUE % | 80% |
Pad Size | 36x36x3 |
Suction Line Size | 7/8" |
Liquid Line Size | 3/8" |