We use cookies to make your experience better. Read more
5.0 Ton 2-STAGE 18 SEER AC 26TPA860 CVAMA6021XMA 58TP0B110V21--22 |Multi-Position |21"W
26TPA8 Performance R454B Puron Advance 2 Stage AC Condenser
Efficiency
Up to 17.0 SEER2 (18 SEER)/ Up to 13.5 EER2 (14.5 EER)
Microtube Technology refrigeration system
Indoor air quality accessories available
Sound
Sound level as low as 71 dBA
Comfort
System supports Thermidistat or standard 2-stage thermostat controls
Reliability
Puron Advance R454B refrigerant - environmentally sound, won’t deplete the ozone layer and low lifetime service cost.
Front-seating service valves
2-stage scroll compressor
Internal pressure relief valve
Internal thermal overload
Filter drier
Balanced refrigeration system for maximum reliability
Durability
WeatherArmor™ Ultra Protection Package:
Solid, Durable sheet metal construction
Steel louver coil guard
Baked-on, complete outer coverage, powder paint
Applications
Long-line - up to 250 feet (76.2 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.38 m) evaporator above condenser (See Longline Guide for more information.)
Low ambient cooling (down to 0°F / -17.8°C ) with approved low ambient accessory kits
CVAMA Puron Advance R454B Multi Position Evaporator Coil
This CVAMA evaporator coil incorporates proven standards for reliable system operation and performance throughout the life of this product. These quality coils, manufactured and installed as part of a total comfort system, provide AHRI-rated performance ratings and are additionally listed with UL and c-UL.
Available for use with Puron Advance R-454B refrigerant only, it is a cased V-coil that is housed in a durable, 24-gauge, pre-painted taupe metallic cabinet. The fully insulated cabinet (foil faced with R-2.1 insulation) provides for quiet efficient operation of the evaporator coil.
DESIGN FEATURES
• Refrigerant leak detection dissipation system for added safety.
• Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
• All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
• The corrosion-resistant drain pan is designed of a “Polybutylene terephthalate” material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
• The drain pan is supplied with three water-tight drain plugs to prevent leakage from unused drain connections.
• Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the line set connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.
• Meets or exceeds burst pressure of 2100 psi, which is at least three times the maximum operating pressure it would see in actual cooling or heating applications.
• This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
• Comes with a “no delta plate” for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.
• All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation
WARRANTY
• Default 5-year parts limited warranty:
– 10-year parts limited warranty with timely registration*. Equipment must be registered within 90 days of original installation, except in jurisdictions where warranty benefits cannot be conditioned on registration.
* Applies to original purchaser/homeowner and not available to subsequent owners, except in jurisdictions where laws dictate otherwise.
See Warranty certificate for complete details and restrictions
58TP0 Performance 80% 2 Stage Gas Furnace
The 58TP0/58TP1 Two-Stage, Variable--speed, 4-way Multipoise Gas Furnaces offer unmatched comfort in their class with
ComfortHeat® technology in an 80% AFUE gas furnace. You get the benefits of a ComfortHeat® technology furnace: reduced drafts, reduced sound levels, longer cycles, less temperature swings between cycles, and less temperature differences between rooms. Its exclusive, intelligent microprocessor control adapts to the heating needs of the home by automatically adjusting high and low heat times to maximize comfort. The 58TP0/58TP1 furnaces are approved for use with natural or propane gas. 58TP1 -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
PERFORMANCE
ComfortHeat® Technology Intelligent microprocessor control
Two--stage heating with single-stage thermostat with
patented Adaptive Control Technology
Very low operating sound through low--stage operation and
QuieTecht system
Microprocessor based control center
Enhanced diagnostics with LED and reflective sight glass
Stores fault codes during power outages
Adjustable heating air temperature rise
Adjustable cooling airflow
Power Heat Igniter
Draft Safeguard switch to ensure proper furnace venting
Insulated blower compartment
Inner door for tighter sealing
Variable-speed ECM blower motor
Increased SEER ratings for AC and HP systems as compared to the Air Conditioning Heating and Refrigeration Institute’s
standard coil--only rating when paired with selected Carrier evaporator coils.
Perfectly matches CFM to cooling system at all static points
INSTALLATION FLEXIBILITY
Four--position furnace: Up flow, Horizontal Right, Horizontal Left, Downflow
Thirteen different vent options
Compact design -- only 33-1/3 in. (847 mm) tall
APPLICATIONS
SmartEvapt--Humidity control when using a Thermidistat control
Comfort Fan adjustable constant fan speed from the thermostat
All models are Chimney friendly when used with accessory vent kit
HYBRID HEAT Dual Fuel System compatible
CERTIFICATION
Cabinet air leakage less than 2.0% at 1.0 in.W.C. and
cabinet air leakage less than 1.4% at 0.5 in.W.C. when
tested in accordance with ASHRAE standard 193
Prop 65
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
Brand/ Manufacturer | Carrier |
---|---|
Model # | 26TPA860 CVAMA6021XMA 58TP0B110V21--22 |
System Type | Cooling with Gas Heat |
Product Series | Perform 18 2Stg R454B |
Tons | 5 |
BTU | 55500 Cooling at 95F |
Nominal SEER | 18 SEER |
System SEER | 15 SEER |
Rated SEER | 15.5 |
Rated EER | 12 |
HSPF Rating | NA |
Refrigerant | R-454B |
Install Position | R454B Multi-Pos VCoil/CVAM |
AFUE % | 80% |
Pad Size | 36x36x3 |
Suction Line Size | 7/8"-1-1/8" |
Liquid Line Size | 3/8" |