We use cookies to make your experience better. Read more
26SCA5 1 Stage AC R454B
This unit has been designed utilizing Carrier’s non-ozone depleting and low global warming potential Puron Advance™ refrigerant. Heat pumps with Puron Advance™ refrigerant provide a collection of features unmatched by any other family of equipment.
Features / Benefits
Efficiency
14.3 - 16.0 SEER2 / 10.0 - 12.5 EER2 / 7.5 - 7.8 HSPF2 (depending on unit size and indoor combination installed)
Microtube technology refrigeration system
Indoor air quality accessories available
Comfort
System supports programmable or standard thermostat controls
Sound
Sound levels as low as 70 dBA
Reliability
Non-ozone depleting and low global warming potential Puron Advance™ refrigerant
Scroll compressor
Internal pressure relief valve
Internal thermal overload
Loss of charge switch
Filter drier
Balanced refrigeration system for maximum reliability
Durability
WeatherArmor™ Ultra Protection Package:
Solid, durable sheet metal construction
Dense wire coil guard
Applications
Long-line - up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.38 m) evaporator above condenser (See Longline Guide for more information.)
Low ambient cooling (down to 0°F/-17.8°C) with approved low ambient accessory kits
Limited Warranty
5-year parts limited warranty (including compressor and coil) 10-year parts limited warranty (including compressor and coil) with timely registration*
– Equipment must be registered within 90 days of original installation, except in jurisdictions where warranty benefits cannot be conditioned on registration.
* Applies to original purchaser/homeowner and not available to subsequent owners except in jurisdictions where applicable laws dictate otherwise.
See warranty certificate for complete details and restrictions.
Prop 65
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
59SC6A 96% 1 Stage Comfort Gas Furnace
The 59SC6A Multipoise Comfort™ Condensing Gas Furnace features year-round electrical efficiency when paired with a compatible condensing unit. Energy efficiency is at the heart of this furnace with up to 96.5% AFUE, gas efficiency and the electrically-efficient fixed-speeds, constant torque (MCT) ECM blower motor. Improved serviceability with the 3 digit status display and NFC enabled board allowing setup via the service tech app. This gas furnace also features 4-way multipoise installation flexibility, and is available in eleven model sizes. All sizes except the 26,000 BTUh model can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. The 26,000 BTUh model can use the same 2-pipe venting system using outside air for combustion, but is not considered direct-vent. All sizes are design certified in Canada, and select sizes are certified for mobile/manufactured home use with conversion kit accessory.
PERFORMANCE
Multi 18-speed, constant torque (MCT) ECM blower motor for electrically efficient operation all year long in heating, cooling and continuous fan operation.
Enhanced diagnostics with easy to read 3-digit display for faults and status.
Single-speed inducer motor, and single-stage gas valve.
Silicon Nitride PowerHeat™ Hot Surface Igniter.
Dual fuel capable HybridHeat™ with a compatible heat pump and thermostat for energy-saving heating performance
Adjustable blower speed for heating and cooling.
Aluminized-steel primary heat exchanger.
Stainless-steel condensing secondary heat exchanger.
INSTALLATION FLEXIBILITY
On-board NFC antenna makes setup a tap away when using the Carrier service technician app.
4-way multipoise design for upflow, downflow or horizontal installation, with unique vent elbow for optional venting through-the-cabinet downflow venting capability.
Factory-configured ready for upflow applications.
Ideal height 35” (889 mm) cabinet: short enough for taller coils, but still allows enough room for service.
Two-pipe venting, single-pipe venting or ventilated combustion air.
APPLICATIONS
Approved for Twinning applications with accessory kit (060E17--14, 080E17--16, 080E21--20, 100E21--20, 120E24--22, 140E24--22 models, only).
Approved for Manufactured Housing/Mobile Home applications with MH accessory kit.
Convertible to propane with gas conversion accessory kit.
CERTIFICATIONS
All sizes meet ENERGY STAR® Version 4.1 criteria for gas furnaces: 95%+ AFUE.
Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193.
All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirements.
Prop 65
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
CAAMP Puron Advance R454B Multi Position Evaporator Coil
The CAAMP evaporator coil incorporates proven standards for reliable system operation and performance throughout the life of this quality Air Conditioner or Heat Pump system. These quality evaporator coils, manufactured and installed as part of a total comfort system, provide AHRI-rated performance ratings and are additionally listed with UL and c-UL.
This coil is available for use with Puron Advance Refrigerant only. It is a cased A-coil that is housed in a durable, 24-gauge, pre-painted taupe metallic cabinet. The fully insulated cabinet (foil faced with R-2.1 insulation properties) provides for quiet efficient operation of the evaporator coil. This multipoise coil offers the most in installation application flexibility; one coil for a variety of applications with fewer SKUs to stock.
DESIGN FEATURES
Performance
Designed with performance in mind, this new A-coil offers low pressure drops to enhance system performance and airflow characteristics.
Thermostatic Expansion Valves (TXV)
All coils have refrigerant-specific, factory-installed TXVs.
Durable Condensate Pans (2) The corrosion-resistant drain pans, one for vertical applications and one for horizontal, are designed in a “fiberglass reinforced thermoset polyester” material (FRTP) that offers unsurpassed pan strength. It is engineered with proper slope in both pans to help ensure water drainage, improved moisture removal, and home comfort.
Refrigerant Connections
Provided with industry proven sweat connections for leak-free operation to maintain system reliability. All models come from the factory with enough length of straight tube to accommodate braze-less compression fittings.
The side mounting tubing to the coil slabs allows for easy cleaning/servicing of the coils, as well as easy access to the TXV.
Dissipation System
All models are shipped with a complete A2L (R-454B) dissipation system, which is required for installation.
Burst Pressure
Meets or exceeds burst pressure of 2100 psi, which is at least three to five times the pressure it would see in actual application.
UV Knockouts
This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
Serviceability
Comes with a “split delta plate” for easy, quick access to the coil for service and cleaning. Also, after the door is removed, the coil is removable from the front of the unit without use of any tools.
Warranty
• Default 5-year parts limited warranty:
* Applies to original purchaser/homeowner and not available to subsequent owners, except in jurisdictions where laws dictate otherwise.
See Warranty certificate for complete details and restrictions.
Brand/ Manufacturer | Carrier® |
---|---|
Model # | 26SCA560 CAAMP6124AMA 59SC6A120M24--22 |
System Type | Cooling with Gas Heat |
Product Series | Comfort™ 15 1Stg R454B |
Tons | 5 |
BTU | 59000 Cooling at 95F |
Nominal SEER | 16 SEER |
System SEER | 15 SEER |
Rated SEER | 15.2 |
Rated EER | 12.5 |
HSPF Rating | NA |
Refrigerant | R-454B |
Install Position | R454B Multi-Pos ACoil/CAAM |
AFUE % | 96% |
Pad Size | 36x36x3 |
Suction Line Size | 7/8"-1-1/8" |
Liquid Line Size | 3/8" |