We use cookies to make your experience better. Read more
24SCA5 15 SEER2 Comfort Air ConditionerFeatures / Benefits
Efficiency
13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2 – 13.0 EER2 (11.2 - 13.0 EER)
Microtube Technology refrigeration system
Indoor air quality accessories available
Reliability
Puron refrigerant - environmentally sound, won’t deplete the ozone layer and low lifetime service cost.
Scroll compressor
Internal pressure relief valve
Internal thermal overload
Filter drier
Durability
WeatherArmor™ Protection Package:
Solid, durable sheet metal construction
Dense wire coil guard
Applications
Long–line – up to 250 feet (76.20 m) total equivalent length, up to 200 feet (60.96 m) condenser above evaporator, or up to 80 ft. (24.4 m) evaporator above condenser (See Long Line Guide for more information.)
Low ambient cooling (down to 0°F / -18°C ) with approved low ambient accessory kits.
Prop 65
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
THE 58SC0B/58SC1B GAS FURNACE
Description
The 58SC0B/58SC1B Comfort™ Series 4-way Multipoise Gas Furnaces feature Carrier’s QuieTech™ noise reduction system for incredibly quiet induced draft operation. Applications are easy with 4-way multipoise design, through-the-furnace downflow venting, 13 different venting options, and designed for easy service access. An inner blower door is provided for tighter sealing in sensitive applications. Improved serviceability with the 3 digit status display and NFC enabled board allowing setup via the service tech app. The 58SC0B/58SC1B furnaces are approved for use with natural or propane gas, and the 58SC1B - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40 ng/J NOx emissions limit.
PERFORMANCE
Single Stage gas valve
Multi 18-Speed, Constant Torque (MCT) ECM blower motor
QuieTech™ noise reduction system
Microprocessor based control center
Adjustable heating air temperature rise
Adjustable cooling airflow
Enhanced diagnostics with easy to read 3 digit display for faults and status
Stores fault codes during power outages
Power Heat™ Igniter
Draft safeguard switch designed to ensure proper furnace venting
Inner door for tighter sealing
INSTALLATION FLEXIBILITY
4-way Multipoise furnace, 13 vent applications
On-board NFC antenna makes setup a tap away when using the Carrier service technician app
HYBRID HEAT® Dual Fuel System compatible
All models are chimney friendly when used with accessory vent kit
Select sizes approved for twinning, refer to accessory kit listing
APPLICATIONS
Compact design - only 33-1/3 in. (847 mm) tall
Propane convertible with gas conversion accessory
Convenient Air Purifier and Humidifier connections
CERTIFICATION
Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
Residential installations eligible for consumer financing through the Retail Credit Program
Prop 65
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
CVPMA Multi Position Coil
This evaporator coil incorporates proven standards for reliable system operation and performance throughout the life of this product. These quality coils, manufactured and installed as part of a total comfort system, provide AHRI-rated performance ratings and are additionally listed with UL and c-UL.
Available for use in Puron® R-410A refrigerant only, it is a cased V-coil that is housed in a durable, 24-gauge, pre-painted taupe metallic cabinet. The fully insulated cabinet (foil faced with R-2.1 insulation) provides for quiet efficient operation of the evaporator coil.
IMPORTANT: This design is for AC applications only.
DESIGN FEATURES
Performance - Designed with performance in mind, this new evaporator coil offers lower pressure drops to enhance system performance and airflow characteristics.
Thermostatic Expansion Valves (TXV) - All coils have refrigerant-specific, factory-installed TXVs. All models are factory pre-set to approximately 10° of superheat at the suction service valve.
Durable Condensate Pan - The corrosion-resistant drain pan is designed of a “Polybutylene terephthalate” material (PBT) that offers unsurpassed pan strength. It is engineered with proper slope to help ensure water drainage, improved moisture removal, and home comfort.
Condensate Drain Pan Plugs - The drain pan is supplied with five water-tight drain plugs (three vertical; two horizontal) to prevent leakage from unused drain connections.
Refrigerant Connections - Provided with industry proven sweat connections for leak-free operation to maintain system reliability. The location of the lineset connections allows for removal of the access door for easy cleaning/servicing of the coils, as well as easy access to the TXV. All models come from the factory with enough length of straight tube—once the pipe swages are cut off—to accommodate braze-less compression fittings.
Burst Pressure - Meets or exceeds burst pressure of 1900 psi, which is at least three times the maximum operating pressure it would see in actual cooling-only application.
UV Knockout - This cased coil comes with factory-installed UV knockouts for quick and easy installation of UV lights.
Serviceability - Comes with a “no delta plate” for easy, quick access to both sides of the coil for service and cleaning. Also, after the door is removed and refrigerant lines disconnected, the coil is removable from the front of the unit without the use of any tools.
Prop 65
Warning: this product contains a chemical known to the State of California to cause cancer. P65Warnings.ca.gov
Brand/ Manufacturer | Carrier |
---|---|
Model # | 24SCA530 CVPMA3117XMC 58SC0B070M17--12 |
System Type | Cooling with Gas Heat |
Product Series | Comfort 15 SEER2 1 Stg AC |
Tons | 2.5 |
BTU | 28,400 |
Nominal SEER | 15 SEER |
System SEER | 16 SEER |
Rated SEER | 16 |
Rated EER | 12.5 |
HSPF Rating | NA |
Refrigerant | R-410A |
Install Position | Multi-Pos. V Coil/CVPMA |
AFUE % | 80% |
Pad Size | 36x36x3 |
Suction Line Size | 3/4" |
Liquid Line Size | 3/8" |